2025 Hot Sell Tapered Roller Bearing Jvz Brand Tapered Roller Bearing Single Row P6 32326 130*280*99.5 Olde Number 7626e

• Material: Chrome Steel
• Outer Ring: Gcr15
• Inner Ring: Gcr15
• Model NO.: 32326
• Roller: Chrome Steel
• Precision: P6 P0
• Cearance: C0
• Brand: Jvz
• Wight: 26.6kg
• Transport Package: Single Box & Cartoon
• Specification: 130*280*99.5
• Trademark: JVZ
• Origin: China
• HS Code: 8482200000
• Production Capacity: 50000

Product Description

The tapered roller bearing is used to support combinations of large axial and radial loads or just large axial loads. The contact angles of the inner ring (called the cone) and the outer ring (referred to as the cup) raceways are not equal, and under rotation, the angular difference produces a component of force on the rollers that establishes contact between the large roller ends and a guide flange (called a rib) located on either the cup or the cone. Since a large amount of sliding contact exists in the interface between the large roller end and the rib face, and is therefore subject to significant friction, tapered roller bearings are not usually suitable for high-speed operation. However, higher rotational speeds can be obtained with specialized cooling, lubrication, and surface treatment.

Tapered roller bearings, single row 32326

Bearing number : 32326

Size (mm) :  130*280*99.5

Brand : JVZ

Bore Diameter (mm) : 130

Outer Diameter (mm) : 280

Width (mm) : 99.5

Mass bearing  26.6kg

The most common material for ball bearing, roller bearing, and tapered roller bearing is chrome SAE 52100 bearing steel. This bearing can be made by high carbon content of 1.5% and has Rockwell hardness of about 64 HRC. Chrome steel bearings can operate at higher temperatures of 120°C, but providing heat treatment to the bearings, their operational temperature exceeds 220°C. Although chrome bearing has excellent wear resistance capability, it is most susceptible to corrosion due to low chromium content. Surface of bearing must be protected from oxidation by giving wear resistance coating or by providing fluid film over it. Stainless steel bearing possess higher chromium content up to 18%, which makes it superior to SAE 52100 when comparing corrosion-resistance behavior. The major disadvantage of stainless steel bearings is that they are low hardness of about 58 HRC and have 20% less overall load-carrying capacity. Stainless steel bearings are even costlier and operate at higher temperatures up to 250°C. The standard composition of SAE 52100 and AISI 52100 bearing steel is incorporated in Table 11.2.